Table of Contents
Advertisement
CHAPTER 2 –
CONNECT THE SF61B
SF61B BLUETOOTH DEVICE ADDRESS
LOCATION
When connecting your SF61B to a host device you may need to note its Bluetooth
Device Address (BDA) which you will find on the product label:
SF61B Bluetooth Device Address:
The SF61B Bluetooth Device Address (BDA) is located on the scanner label.
You may also need the BDA of the Bluetooth host device you want to connect to.
CONNECTION LOST BEHAVIOR
If the Bluetooth connection is lost (out of range, scanner battery too low, host reboot,
etc.) the scanner will automatically try to reconnect once the problem is resolved
(back into range, recharge scanner battery, etc.). If you try to read a barcode while the
scanner is disconnected from the host, the scanner will emit an error beep.
Note: This automatic reconnection will not occur if the SPP Outgoing
(host-initiated) profile is used to pair with the host.
18
Intermec Technologies Corp.
Everett, WA USA
5V
1.7A
MODEL, MODELO,
,
:
1016SP01B
MFD,
,
: YYYYMMDD
BDA: XXXXXXXXXXXXXX
CN: XXXXXXXXXXXXXX
SN: XXXXXXXXXXX
Bluetooth device address
CONNECT THE SF61B
TO A HONEYWELL
COMPUTER
Note: The following
procedure is valid for recent
Honeywell computers. If your
Honeywell computer has
a different interface than
the one described here, the
general principle will be the
same.
Refer to the product-specific
documentation for your
Honeywell computer for full
details on how to connect
Bluetooth devices to your
product.
This procedure tells you how to connect
your SF61B cordless scanner to a recent
Honeywell computer running Windows®.
TO ACTIVATE BLUETOOTH ON
THE HONEYWELL COMPUTER
1.
Tap Start > Settings > Bluetooth
> Mode and check the Turn on
Bluetooth check box.
TO PAIR AND CONNECT THE
SF61B WITH THE HONEYWELL
COMPUTER
1.
Tap Start > Settings > System >
Wireless Scanning > Add Device >
Quick Connect > Next.
The computer displays a Bluetooth
association barcode containing
the computer's Bluetooth Device
Address (BDA).
2.
Read the association barcode
with your SF61B (you should be
able to read it on the screen of the
Honeywell computer). The SF61B's
blue Honeywell Ready-to-Work
indicator blinks slowly to show that it
is waiting for a Bluetooth connection
and the computer asks if you want to
add the scanner to its device list.
User's Guide | SF61 Cordless Scanner
Advertisement
Table of Contents
