Table of Contents
Advertisement
CHAPTER 3 –
CONFIGURE THE SF61B CORDLESS SCANNER
ONLINE SETUP WITH EASYSET
Note: In the following procedure you will use one of the following methods
to connect your scanner to EasySet for online setup:
•
HID Bluetooth connection
•
host-initiated (Outgoing) SPP Bluetooth connection
TO CONFIGURE YOUR SCANNER ONLINE BY SENDING
COMMANDS FROM EASYSET
1.
Pair your SF61B with your EasySet host PC and connect it using one of the
following methods described in Chapter 2:
•
For an HID connection: See
and connection are simultaneous).
•
For a host-initiated (Outgoing) SPP connection: See
Device Profile – Outgoing
2.
Start EasySet and select the SF61B product (Product > Select > Handheld
scanners > SF61B).
•
If the Select product dialog box does not appear, choose Product > Select or
click on the product icon in the upper left corner of the EasySet window.
3.
Select Communication > Select communication interface. The Device Selection
dialog box appears.
4.
Select the connection channel corresponding to the connection method you have
chosen (Bluetooth Keyboard for an HID connection or the Outgoing virtual COM
port for a host-initiated SPP connection) and click OK.
5.
EasySet connects to your scanner and displays your scanner's current
configuration settings in blue next to the commands.
•
These settings are indicated by a blue check mark or blue text.
•
Open the folders in the EasySet commands window to find the configuration
commands you need and double-click each command to send it to your
scanner.
Note: The scanner does not beep when you send configuration
commands online from EasySet. It powers off when you select
Disconnect from the Communication menu in EasySet.
TO DISCONNECT YOUR SCANNER FROM EASYSET
1.
Select Disconnect from the Communication menu in EasySet.
•
HID connection: the scanner disconnects from EasySet and restarts, and
then goes into "ready to work" mode (the blue Honeywell Ready-to-Work
indicator comes on) as it is still connected to the host PC.
•
Host-initiated Outgoing SPP connection: the scanner disconnects from
EasySet and restarts but it is no longer connected to the host PC.
32
Connect in HID Device Profile
Connection.
OFFLINE SETUP WITH
EASYSET
TO CONFIGURE YOUR SCANNER
OFFLINE BY SCANNING
BARCODES
1.
(with HID, pairing
To Connect in SPP
2.
3.
4.
User's Guide | SF61 Cordless Scanner
Start EasySet. The first time you start
EasySet, the Select product dialog
box appears.
If the Select product dialog
•
box does not appear, choose
Product > Select or click on the
product icon in the upper left
corner of the EasySet window.
Select your product.
Open the folders in the EasySet
commands window to find the
configuration commands you need
and double-click each command to
send it to the setup sheet.
Click on the Print icon to print out
the setup sheet and then scan the
commands with your SF61B cordless
scanner.
Advertisement
Table of Contents
