Table of Contents
Advertisement
PROBLEM
POSSIBLE SOLUTION
There may be a Bluetooth management problem on your
host device. Try the following procedure:
1.
2.
You have added your
3.
scanner to your host
4.
device during an SPP
pairing procedure
but you cannot see
If this does not solve the problem, try this workaround (see
the corresponding
Chapter 2,
Outgoing and In-
pairing / connection methods):
coming COM ports in
1.
your host's Bluetooth
settings.
2.
3.
4.
Your SF61B may be switched off or connected to another
Bluetooth host, or there may be a Bluetooth management
You are trying to
problem on your host device. Try one or more of the follow-
establish a Bluetooth
ing (see Chapter 2,
connection from a
different pairing / connection methods):
host device to your
•
SF61B, but the host
•
device cannot find
your scanner.
•
•
You established a
Bluetooth connec-
When you first connect to a Honeywell computer, only
tion with a Honeywell
SF61B settings common to the Honeywell computer's
computer, and the
internal scanner settings are changed to the internal scan-
ner's default settings. Scan configuration barcodes, or use
settings on your
SF61B were restored
Honeywell Settings on your Honeywell computer to change
to their default val-
your SF61B settings.
ues.
You cannot use your
SF61B to change
You must use an SF51 scanner or another compatible
the configuration
product if you want to change the settings of an SD61 base
settings of an SD61
station.
base station.
Try to perform a hardware reset of your scanner (see below,
in the present chapter).
•
Your scanner is unre-
sponsive or appears
•
to be locked.
User's Guide | SF61 Cordless Scanner
CHAPTER 4 –
Disconnect your scanner from your host device (see
Connect the
SF61B).
Chapter 2,
Remove your scanner from the host's device list.
Restart your host device (power down / power up).
Re-pair your scanner with your host for SPP connection
and check the available COM ports in your host device's
Bluetooth settings.
Connect the SF61B
Pair / connect your scanner with your host device using
the HID profile.
Disconnect your scanner from the host device.
Remove your scanner from the host's device list if
applicable.
Re-pair your scanner with your host for SPP connection
and check the available COM ports in your host device's
Bluetooth settings.
Connect the SF61B
Press the scan button to power up your product.
Disconnect your product if it is connected to another
host.
Re-pair your product with your host device.
Restart your host device (power down / power up).
A hardware reset will restart your scanner but it will not
reset your custom configuration settings.
Depending on the type of Bluetooth connection you
are using, your scanner will automatically reconnect
with your host device / application or you will have to
reconnect manually.
TROUBLESHOOT AND MAINTAIN THE SF61B
for details on the different
for details on the
37
Advertisement
Table of Contents
