Table of Contents
Advertisement
•
Repeat the entire firmware upgrade procedure including removing your
SF61B from the host's list of Bluetooth devices (if applicable) and re-pairing
with the host system.
8.
Select the Outgoing COM port your SF61B is connected to.
Note: To identify the correct Outgoing port, right-click the Bluetooth
icon in the Windows system tray, choose the Open Settings option (or
equivalent), and look at the COM Ports details.
9.
Click Start download.
Your host PC may display a message saying that a Bluetooth device is trying to
connect. If this is the case, click OK to launch the upgrade process (you may have to
enter your scanner's pairing code; the default pairing code is "0000").
The scanner blinks with a slower red blink when the firmware upgrade has started and
is in progress.
When the firmware upgrade is complete, an "Operation successful" message is
displayed in the Download progress window, the scanner emits a "success" beep
sequence, and then powers down and restarts.
10. Click Finish. You have successfully upgraded your scanner firmware.
Note: If the firmware upgrade procedure is interrupted, with a "Can't open
communication port" message for example, close WinFlash and close
EasySet and repeat the entire procedure including removing your SF61B
from the host's list of Bluetooth devices and re-pairing with the host
system.
When the firmware upgrade is completed you will need to pair again with your host
device and re-establish your Bluetooth connection.
User's Guide | SF61 Cordless Scanner
CHAPTER 4 –
TROUBLESHOOT AND MAINTAIN THE SF61B
43
Advertisement
Table of Contents
