Table of Contents
Advertisement
PRE-INSTALLATION
Figure 3
Position Of The Securing Screws
Figure 4
Position of Connectors X4, X36 and X35 and Jumpers X28 and X21
A24205-A334-B832 (Edition 1)
P/N 315-035600-2
The ZAM-180 takes one sub-address on the DAC-NET. To configure the CAN
address use the two rotary-switches on the front panel (refer to Figure 2)
Remove screws as shown in Figure 3 on the left and the right side of the
ZAM-180 housing and remove the front plate.
For setting the speaker line voltage and the low frequency cutoff see
Figure 4.
4
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
