Table of Contents
Advertisement
3-44
IBM 3708 Description
X'06'-Resource Unknown
An ACTPU command was received whose address does not equal one of the
two possible station addresses configured in the 3708, or an ACTPU
command was received whose DAF (DAF'-2) is not equal to a Device
Number configured in the 3708.
X' OA '-Permission Rejected
Display or printer power is off. The SSCP is not notified when the device
powers on.
X' OB '-Bracket Race Error
This sense code is sent in protocol enveloping when the application transmits
BB and the 3708 is already in brackets.
X'OC'-Procedure Not Supported
An unsupported REQMS type request was received.
X'll'-Break
• Sent in LV type 1 SCS mode when the operator presses the printer Hold
Print Key followed by Cancel key, if a chain has not completed printing.
• Sent in LV type 1 NTO mode when the operator generates a break and
the 3708 is in the middle of a chain from the host.
X' 13 '-Bracket BID Reject-(No RTR)
• Returned by LV type 1 to a BID or BID with begin bracket if the
display has won contention and started a bracket.
• Returned in protocol conversion mode when a BID or begin bracket
was received and INB state already exists. This may be a protocol
error.
X '14'-Bracket BID Reject-(RTR to follow)
For LV type 1 or 3, the printer is busy doing local copy from a display.
RTR is returned when the printer becomes not busy with local copy.
X '15 '-Function Active
REQMS request is in process.
X'16'-Function Inactive
Sent if a DACTLV is received before the SSCP-LU session is established.
X 'IA '-Request Sequence Error
Generated by the 3708 when the first RV in a configuration download is not
NS_IPL_INIT.
X 'IB '-Receiver in Transmit Mode
The SLU is between bracket, but a data key has been pressed.
BIND parameters do not match the 3708 BIND checks.
X' 21 '-Invalid Session Parameters
BIND indicated a screen size that was not supported by either the 3708 port
or the terminal.
X'2B'-Presentation Space Integrity Lost
• A temporary error has occurred; for example, parity check in device.
• An operator has cleared the display by switching to SSCP-SLV Session
or Test mode and returned to PLU-SLU session.
Advertisement
Table of Contents
