3.
Display the network range assignment setting window, and configure the setting as follows.
Project window
Project window
4.
Display the refresh parameter setting window, and configure the setting as follows.
Project window
5.
Write the set parameters to the CPU module on the master station. Then reset the CPU module or
turn off and on the power supply of the programmable controller.
[Online]
144
[Parameter]
[Ethernet/CC IE/MELSECNET]
[Parameter]
[Ethernet/CC IE/MELSECNET]
"XY Setting"
[Parameter]
[Ethernet/CC IE/MELSECNET]
[Write to PLC...]
[Network Parameter]
[Network Parameter]
[Network Parameter]
or Power off
on
button
button
"Switch Screens"
button