Table of Contents
Advertisement
OBJ_BUCH-2637-002.book Page 16 Wednesday, June 22, 2016 4:13 PM
16 | English
English
Safety Notes
All instructions must be read and observed
in order to work safely with the measuring
tool. The integrated protections in the
measuring tool may be compromised if the
measuring tool is not used in accordance
with the instructions provided. Never make warning signs
on the measuring tool unrecognisable. STORE THESE IN-
STRUCTIONS IN A SAFE PLACE AND INCLUDE THEM WITH
THE MEASURING TOOL WHEN GIVING IT TO A THIRD PAR-
TY.
Caution – The use of other operating or adjusting
equipment or the application of other processing meth-
ods than those mentioned here can lead to dangerous
radiation exposure.
The measuring tool is provided with a warning label
(marked with number 12 in the representation of the
measuring tool on the graphics page).
GCL 2-15
GCL 2-15 G
If the text of the warning label is not in your national
language, stick the provided warning label in your na-
tional language over it before operating for the first
time.
Do not direct the laser beam at persons
or animals and do not stare into the di-
rect or reflected laser beam yourself, not
even from a distance. You could blind
somebody, cause accidents or damage
your eyes.
If laser radiation strikes your eye, you must deliberate-
ly close your eyes and immediately turn your head
away from the beam.
Do not make any modifications to the laser equipment.
Do not use the laser viewing glasses as safety goggles.
The laser viewing glasses are used for improved visualisa-
tion of the laser beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun glasses or in
traffic. The laser viewing glasses do not afford complete
UV protection and reduce colour perception.
Have the measuring tool repaired only through quali-
fied specialists using original spare parts. This ensures
that the safety of the measuring tool is maintained.
1 609 92A 32T | (22.6.16)
Do not allow children to use the laser measuring tool
without supervision. They could unintentionally blind
other persons or themselves.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring
tool which may ignite the dust or fumes.
Keep the measuring tool and the rotating
mount 13 away from cardiac pacemakers.
The magnets inside the measuring tool and the
rotating mount generate a field that can impair
the function of cardiac pacemakers.
Keep the measuring tool and the rotating mount 13
away from magnetic data media and magnetically sen-
sitive equipment. The effect of the magnets inside the
measuring tool and the rotating mount can lead to irrevers-
ible data loss.
Product Description and Specifica-
tions
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for determining and checking
horizontal and vertical lines as well as plumb points.
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1 Exit opening for laser beam
2 On/Off switch
3 Battery capacity indicator
4 Working without automatic levelling indicator
5 Button for "laser point" operating mode
6 Button for "laser line" operating mode
7 Battery lid
8 Guide groove
9 Tripod mount 1/4"
10 Tripod mount 5/8"
11 Serial number
12 Laser warning label
13 Rotating mount(RM 1)
14 Guide rail
15 Fastening slot
16 Magnets
17 Ceiling clip*
18 Universal holder (BM 1)*
19 Protective pouch*
20 Case*
21 Inlay*
22 Laser target plate*
23 Construction tripod (BT 150)*
Bosch Power Tools
Advertisement
Table of Contents
Related Manuals for Bosch GCL 2-15
Summary of Contents for Bosch GCL 2-15
- Page 1 Intended Use The measuring tool is intended for determining and checking GCL 2-15 G horizontal and vertical lines as well as plumb points. Product Features The numbering of the product features shown refers to the il- ...
-
Page 2: Technical Data
* The accessories illustrated or described are not included as standard delivery. 25 Laser viewing glasses* Technical Data Point and line laser GCL 2-15 GCL 2-15 G Article number 3 601 K66 E.. 3 601 K66 J.. Working range – Laser line... -
Page 3: Initial Operation
” (for working without automatic level- ling) or to position “ ” (for working with automatic levelling). As soon as it is switched on, the measuring tool emits laser lines from the exit openings 1. 1 609 92A 32T | (22.6.16) Bosch Power Tools... - Page 4 If during work without automatic levelling you switch to the “working with automatic levelling” mode (On/Off switch 2 in position “ ”) the first combination of this mode’s indi- cators is always activated. Bosch Power Tools 1 609 92A 32T | (22.6.16)
-
Page 5: Automatic Levelling
Should the measuring tool exceed the maximum deviation during one of the tests, please have it repaired by a Bosch af- ter-sales service. Checking the Height Accuracy of the Horizontal Line For this check, a free measuring distance of 5 m on a firm sur- face between two walls A and B is required. - Page 6 – Align the height of the measuring tool (using a tripod or by underlaying, if required) in such a manner that the centre of the laser line is projected exactly against the previously marked point II on wall B. Bosch Power Tools 1 609 92A 32T | (22.6.16)
-
Page 7: Working Advice
The laser target plate 22 increases the visibility of the laser beam under unfavourable conditions and at large distances. The reflective part of the laser target plate 22 improves the visibility of the laser line. Thanks to the transparent part, the 1 609 92A 32T | (22.6.16) Bosch Power Tools... -
Page 8: Maintenance And Service
Measuring tools, accessories and packaging should be sorted UB 9 5HJ for environmental-friendly recycling. At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Do not dispose of measuring tools and batteries/rechargea- Tel.