Advertisement
•
Only do the maintenance as given in this operator's
manual. Let an approved service center do all other
servicing.
•
Remove all tools from the product before you start
the engine after maintenance. Loose tools or tools
attached to rotating parts can eject and cause injury.
Introduction
WARNING: Read and understand the safety
chapter before you use the product.
To do before you operate the product
•
Read the operator's manual carefully and make sure
that you understand the instructions.
•
Read the engine manual that is supplied by the
engine manufacturer.
•
Do the daily maintenance. Refer to
schedule on page 12 .
To set the handle to operation position
WARNING: Hold the handle tightly when you
change the position of the handle. There is a
risk of injury if the handle falls on you.
1. Hold the handle.
2. Release the lock lever and lower the handle
carefully.
1364 - 001 - 25.03.2020
•
•
Operation
To adjust the handle height
•
Maintenance
To start the product manually
Do this procedure if the product has an engine with
manual start.
After maintenance, do a check of the vibration level
in the product. If it is not correct, speak to an
approved service center.
Let an approved service center do servicing on the
product regularly.
Adjust the handle height with the vibration damping
units for the handle.
a) Turn the screws for the vibration damping units
to adjust the handle height.
CAUTION: Adjust the screws to the
same height to make sure that the load
on the handle is balanced.
9
- Quick Links:
- Maintenance
Hide quick links:
Advertisement
