F
MULTI
WITH
F
MULTI
MAX
Table 1:
Model Number
Capacity
Nominal
Cooling (Btu/h) (Min.~Rated~ Max.)
Cooling Power Input (kW) (Min.~Rated~ Max.)
Cooling Running Current (A) (Min.~Rated~ Max.)
Heating (Btu/h) (Min.~Rated~ Max.)
Heating Power Input (kW) (Min.~Rated~ Max.)
Heating Running Current (A) (Min.~Rated~ Max.)
Operating Range
Cooling (°F DB)
2
Heating (°F WB)
Compressor
Inverter Quantity
Oil / Type
Fan (Side Discharge)
Type
Motor Output (W) x Qty.
Motor / Drive
Maximum Air Flow Rate (ft.
3
Unit Data
Refrigerant Type
Refrigerant Control / Location
Min. Number Indoor Units/System
Max. Number Indoor Units/System
Maximum Allowable Total Indoor Unit Connected Capacity (Btu/h)
Sound Pressure ±3 dB(A) (Cooling / Heating) dB(A)
Dimensions (W x H x D [inch])
Net Unit Weight (lbs.)
Power Supply (V, Phase, Hz)
Communication / Connection (Power) Cable (No. x AWG)
Heat Exchanger
Material and Fin Coating
Rows/Columns / Fins per inch x Qty.
Piping
Liquid Line Connection (in., O.D.) x Qty.
Vapor Line Connection (in., O.D.) x Qty.
Factory Charge oz. of R410A
Additional Charging Volume (oz. / ft.)
Piping Lengths
Maximum Total Piping (ft.)
7
Maximum Outdoor Unit to Indoor Unit Piping (ft.)
Piping Length (No Additional Refrigerant [ft.])
Maximum Elevation between Outdoor Unit and Indoor Unit (ft.)
Maximum Elevation between Indoor Unit and Indoor Unit (ft.)
Rated capacity applied with non-ducted indoor units, and is rated 0 ft. above sea level with 25 ft.
1
of refrigerant line per indoor unit and a 0 ft. level difference between outdoor and indoor
units. All capacities are net with a combination ratio between 95 – 105%.
Rated cooling capacity obtained with air entering the indoor unit at 80ºF dry bulb (DB) and
67ºF wet bulb (WB) and outdoor ambient conditions of 95ºF dry bulb (DB) and 75ºF wet
bulb (WB).
Rated heating capacity obtained with air entering the indoor unit at 70ºF dry bulb (DB) and
60ºF wet bulb (WB) and outdoor ambient conditions of 47ºF dry bulb (DB) and 43ºF wet
bulb (WB).
2
At least two indoor units must be connected. For allocated capacity information, see the
3
combination tables in the "Multi F / Multi F MAX with LGRED Combination Data Manual" on
www.lghvac.com. For performance data, see "Multi F / Multi F MAX with LGRED Perfor-
mance Data Manual" on www.lghvac.com.
1
1
/ min.)
3
3
4
5,6
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
LMU180HHV
18,000
8,400 ~ 18,000 ~ 19,980 8,400 ~ 24,000 ~ 30,000 8,400 ~ 28,400 ~ 34,080
0.88 ~ 1.33 ~ 1.87
0.94 ~ 1.78 ~ 2.49
4.0 ~ 6.0 ~ 8.5
4.3 ~ 8.1 ~ 11.3
10,248~22,000~24,000 10,248~26,000~31,200 10,248~28,600~34,320
1.25 ~ 2.22 ~ 3.11
1.26 ~ 2.12 ~ 2.96
5.7 ~ 10.1 ~ 14.1
5.7 ~ 9.6 ~ 13.5
Twin Rotary x 1
Brushless Digitally Controlled / Direct
Electronic Expansion Valve / Outdoor Unit
2
2
24,000
50 / 54
37-13/32 x 32-27/32 x 13
147.7
208 / 230V, 1, 60
Copper Tube/Aluminum Fin and GoldFin™ / Hydrophilic
(3 x 38 x 16) x 1
Ø1/4 x 2
Ø3/8 x 2
98.8
164
49.2
Sound pressure levels are tested in an anechoic chamber under ISO Standard 3745 and
4
are the same in both cooling and heating mode. These values can increase due to ambient
conditions during operation.
5
with all the applicable local and national codes. For detailed information, please refer to
electrical characteristics on page 10.
Communication / connection (power) cable from the outdoor units to the indoor units must
6
be a minimum of 14 AWG, 4-conductor stranded, shielded or unshielded (if shielded, it
must be grounded to the chassis of the outdoor unit only), and must comply with applicable
local and national codes. For detailed electrical information, please refer to electric charac-
teristics on page 10.
Piping lengths are equivalent.
7
GENERAL DATA
LMU240HHV
LMU300HHV
24,000
30,000
0.95 ~ 2.27 ~ 3.18
4.3 ~ 10.3 ~ 14.5
1.30 ~ 2.33 ~ 3.26
5.9 ~ 10.6 ~ 14.8
14 to +118
-13 to +75
FVC68D
Propeller
124.2 x 1
2,295
R410A
2
3
33,000
40,000
52 / 55
52 / 55
152.1
152.1
4C x 14
Ø1/4 x 3
Ø1/4 x 4
Ø3/8 x 3
Ø3/8 x 4
112.8
0.22
246.1
82.0
73.8
98.4
49.2
24.6
2
4
9