Name; Setup - Honeywell Enraf 1010 CB Programming Manual

Load computer

Hide thumbs

Table Of Contents

Table of Contents

Loading Arms (3)

Select Arm Name Use to select the type of arm name to be displayed for this arm.

Edit Arm Name If enabled allows an 8 character alphanumeric description to be entered

Edit HM Classification Use to select the HM classification number.

Enable Arm n If enabled, the arm is available for use.

5 - 2

5.2.2 Name

Use the NAME sub-menu for entering an arm name.

Select one of the following options:



DEFAULT* (ARM n)



EDIT



ULP



PULP



AVGAS



ADF

for the arm, for example "ULP", "Diesel", "Kero".

Constraints: Select Arm Name = EDIT



8 character alphanumeric

Enter a value in the following range:



1 to 3500 (1*)

5.2.3 Setup

Use the Setup sub-menu to enable or disable an arm, select the display

unit for an arm, select between mass or volume based preset, or set the

maximum preset for an arm.

If disabled, the arm will not be available for use. This is typically used

when a particular arm should not be used, for example, when a pump

fails or a tank is empty.

Constraints: Only available when you use the Weights and Measures

Select one of the following options:



Enable*



Disable

Units Selects the Metric - ISO units that are displayed for the particular arm.

Constraints:



Only if Units under General Setup (21) = Metric - ISO Units.



Only available when you use the Weights and Measures switch on

the instrument to enter Programming mode.

Model 1010 Application Pack CB

Programming Manual

switch on the instrument to enter Programming mode.

Part No.: 4418024 - Rev. 1

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Name; Setup - Honeywell Enraf 1010 CB Programming Manual

5.2.2 Name

5.2.3 Setup

Hide quick links:

Related Manuals for Honeywell Enraf 1010 CB

Related Products for Honeywell Enraf 1010 CB

Table of Contents