Download Print this page

Installing The Router Ground Connection - Cisco Catalyst IR1800 Rugged Series Installation Manual

Hide thumbs Also See for Catalyst IR1800 Rugged Series:

Table of Contents

Installing the Router

Step 2

Attach the DIN mounting bracket to the router using the four 8-32 screws provided in the kit. Position the

bracket over the four mounting holes and then place the screws through the bracket into the chassis. Then use

14 in. lbs. of torque to screw the bracket onto the router.

Step 3

Once the bracket is attached to the router, it can be mounted onto the DIN Rail.

Installing the Router Ground Connection

Danger

This equipment is intended to be grounded to comply with emission and immunity requirements. Ensure that

the switch functional ground lug is connected to earth ground during normal use. Statement 1064

Danger

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available. Statement 1024

Caution

Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National

Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial

Cable.

Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide

Installing the Router Ground Connection

Table of Contents

Show Quick Links

Table of Contents

Catalyst ir1821 Catalyst ir1831 Catalyst ir1833 Catalyst ir1835