Cisco Nexus 9504 Hardware Installation Manual page 33

Nx-os mode switch

Hide thumbs Also See for Nexus 9504:

Table of Contents

Installing a Chassis

Step 2

Insert the stripped end of the grounding wire into the open end of the grounding lug, and use a crimping tool to crimp

the lug to the wire (see Callout 2 in the following figure). Verify that the ground wire is securely attached to the grounding

lug by attempting to pull the wire out of the crimped lug.

Figure 7: Grounding a Cisco Nexus 9504 Chassis

Chassis grounding pad

Grounding cable, with 0.75 in. (19 mm) of insulation

stripped from one end, inserted into the grounding lug

and crimped in place

Two M4 screws used to secure the grounding lug to

the chassis

Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide

Grounding the Chassis

Table of Contents