Auto changeover operation(Heat pump model only)
ON
During Auto changeover Operation
The air conditioner changes the operation mode automatically to keep indoor temperature. When room
temperature vary over ±4°F(±2°C) with respect to setting temperature, air conditioner keeps the room
temperature within ±4°F(±2°C) with respect to setting temperature by auto changeover mode.
1
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door of the remote controller. To select Auto Changeover
2
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is shifted in the
direction of the arrow.
Cooling
Close the door of the remote controller. Set the temperature
3
lower than the room temperature. The temperature can be
set within a range of 64°F~86°F(18°C~30°C) at intervals of
2°F(1°C).
Set the fan speed again with the door
4
of the remote controller still closed.
You can select the fan speed in four
steps-low, medium, high and CHAOS.
Each time the button is pressed, the
fan speed mode is shifted.
Operating Instructions
Auto
Healthy
changeover
Dehumidification
To raise the temperature
To lower the temperature
Owner's Manual 17
Heating
(Heat pump model only)