Heating operation (Heat pump model only)
ON
Natural wind by the CHAOS logic
❏ For fresher feeling, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the
wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic.
1
Press the Start/Stop button.
The unit will respond with
a beep.
2
Open the door of the remote controller. To select Heating
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
Close the door of the remote controller.
3
Set the temperature higher than the room temperature.
The temperature can be set within a range of 60°F~86°F
(16°C~30°C) at intervals of 2°F(1°C).
4
Set the fan speed again with the door of the
remote controller still closed. You can
select the fan speed in four steps–low,
medium, high and CHAOS. Each time the
button is pressed, the fan speed mode is
shifted.
Operating Instructions
Auto
Healthy
Dehumidification
(Heat pump model only)
To raise the temperature
To lower the temperature
Owner's Manual 19
Heating