Advertisement
Quick Links
Interface
PAC-IF011B-E
PAC-IF012B-E
INSTALLATION MANUAL
For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing
the air-conditioner unit.
INSTALLATIONSHANDBUCH
Aus Sicherheitsgründen und zur richtigen Verwendung vor der Installation die vorliegende Bedienungsanleitung
und die Installationsanleitung der Innenanlage gründlich durchlesen die Klimaanlage.
MANUEL D'INSTALLATION
Avant d'installer le climatiseur, lire attentivement ce manuel, ainsi que le manuel d'installation de l'appareil
intérieur pour une utilisation sûre et correcte.
INSTALLATIEHANDLEIDING
Lees deze handleiding en de installatiehandleiding van het binnenapparaat zorgvuldig door voordat u met het
installeren van de airconditioner begint.
MANUAL DE INSTALACIÓN
Para un uso correcto y seguro, lea detalladamente este manual y el manual de instalación de la unidad interior
antes de instalar la unidad de aire acondicionado.
MANUALE DI INSTALLAZIONE
Per un uso sicuro e corretto, leggere attentamente il presente manuale ed il manuale d'installazione dell'unità
interna prima di installare il condizionatore d'aria.
MANUAL DE INSTALAÇÃO
Para uma utilização segura e correcta, leia atentamente este manual e o manual de instalação da unidade
interior antes de instalar o aparelho de ar condicionado.
INSTALLATIONSMANUAL
Læs af sikkerhedshensyn denne manual samt manualen til installation af indendørsenheden grundigt, før du
installerer klimaanlægget.
INSTALLATIONSMANUAL
Läs bruksanvisningen och inomhusenhetens installationshandbok noga innan luftkonditioneringen installeras
så att den används på ett säkert och korrekt sätt.
Emniyetli ve doğru kullanım için, klima cihazını monte etmeden önce bu kılavuzu ve iç ünite montaj kılavuzunu
tamamıyla okuyun.
(Cased)
FOR INSTALLER
FÜR INSTALLATEURE
POUR L'INSTALLATEUR
VOOR DE INSTALLATEUR
PARA EL INSTALADOR
PER L'INSTALLATORE
PARA O INSTALADOR
TIL INSTALLATØREN
FÖR INSTALLATÖREN
English (GB)
Deutsch (D)
Français (F)
Nederlands (NL)
Español (E)
Italiano (I)
Eλληνικά (GR)
Português (P)
Dansk (DE)
Svenska (SW)
Türkçe (TR)
(RU)
Advertisement
Related Manuals for Mitsubishi Electric PAC-IF012B-E
Summary of Contents for Mitsubishi Electric PAC-IF012B-E
- Page 1 Interface (Cased) PAC-IF011B-E PAC-IF012B-E INSTALLATION MANUAL FOR INSTALLER English (GB) For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing the air-conditioner unit. INSTALLATIONSHANDBUCH FÜR INSTALLATEURE Deutsch (D) Aus Sicherheitsgründen und zur richtigen Verwendung vor der Installation die vorliegende Bedienungsanleitung und die Installationsanleitung der Innenanlage gründlich durchlesen die Klimaanlage.
- Page 2 This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV. WEEE) Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electronic equipment, at the end-of-life, should be disposed of separately from your household waste.
- Page 3 1. Safety precautions 1.4. Before starting the test run • Before starting operation, check that all protective parts are correctly in- Caution: stalled. Make sure not to get injured by touching high voltage parts. • Turn on the main power switch of the outdoor unit more than 12 hours •...
- Page 4 3. Electrical work 3.1. Interface unit (Photo. 3-1) 1. Remove the cover. 2. Wire the power cable and control cable separately through the respective wiring inlets given in the photo. • Do not allow slackening of the terminal screws. Inlet for control cable Inlet for power Clamp Interface / Outdoor unit connecting terminals...
- Page 5 Connect the thermistor for the pipe temp. to 3 and 4 on the terminal block (TB61) on the interface controller. 3. Cond./eva. temp. thermistor (TH5): For PAC-IF012B-E only Connect the thermistor for the cond./eva. temp. to 5 and 6 on the terminal block (TB61) on the interface controller.
- Page 6 3. Electrical work 3.1.4. Connecting external input Demand control is available by external input. It is possible to set the outdoor unit’s power consumption by setting the switch of the interface controller. Switch1, Switch 6 : Input selection of inverter capacity setting Input SW 1-1 SW 1-2 SW 1-3 SW 6-1 SW 6-2 Step for capacity setting...
- Page 7 • SW2-6 : COND./EVA. TEMP. THERMISTOR (TH5) SW2-6 Details Model Effect PAC-IF012B-E No effect PAC-IF011B-E 3.1.8.Before test run After completing installation and the wiring and piping of the local application and outdoor units, check for refrigerant leakage, looseness in the power supply or control wiring, wrong polarity, and no disconnection of one phase in the supply.
- Page 8 Local Application Factors * This interface is to connect Mr. Slim inverter outdoor unit of MITSUBISHI ELECTRIC to local applications. Please check the following when designing the local system. * MITSUBISHI ELECTRIC does not take any responsibility on the local system design.
- Page 9 • Electromagnetic Compatibility Directive EU regulations: 2004/108/EC HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN Authorised representative in EU: MITSUBISHI ELECTRIC EUROPE B.V. HARMAN HOUSE, 1 GEORGE STREET, UXBRIDGE, MIDDLESEX UB8 1QQ, U.K. BH79D099H02...