Page 12
English For the customers in the U.S.A. For the customers in Europe This equipment has been tested and found to comply with the This product with the CE marking complies with the EMC limits for a Class A digital device, pursuant to Part 15 of the Directive (89/336/EEC) issued by the Commission of the FCC Rules.
Page 13
Table of Contents Overview..................14 Functions....................14 Formats of assignable signals .............. 14 Applicable video monitors..............14 Names and Functions of Input and Output Connectors.... 15 Installing into Video Monitors ............16 When installing into the BVM-D14H series video monitors ....16 When installing into the PVM-L5 series video monitors ....
Notes monitor and serves as a decoder for HD SDI and SDI (270 • The BKM-143HS is not designed to be installed in the Mbps) signals. BVM-D9H series video monitors. Do not attempt to install the BKM-143HS into these monitors.
For BVM-D14H series video monitors, the embedded Names and Functions of audio CH1(L) and CH2(R) are output. The channel setting is fixed. Input and Output Assigning input signals to connectors Connectors The procedure for displaying signals input to the BKM- 143HS differs depending on the monitor models.
Push the BKM-143HS in until it is firmly seated in the Installing into Video connector inside the video monitor. Monitors When installing into the BVM-D14H series video monitors The BKM-143HS can be installed in any input option slot located on the rear panel of the video monitor.
Remove the covers of two input option slots on the rear panel of your video monitor. Covers of the input option slots Insert the BKM-143HS into the slots. Push the BKM-143HS in until it is firmly seated in the connector inside the video monitor. Installing into Video Monitors...
Select SDI-AUTO. Assigning Input Signals to Connectors After installing the BKM-143HS into your video monitor, the menu screens will change automatically. For the BVM-D14H series video monitors Select either INPUT 1 or INPUT 2 in INPUT NO of Use the INPUT CONFIGURATION menu for the signal the INPUT CONFIGURATION menu.
To select the signal input to the HD SDI/SDI IN 2 connector, press the OPTION B button instead. To select audio signal to output when the BKM-143HS is selected, use the OPTION CONFIG menu. The OPTION CONFIG menu screen when the BKM-143HS installed Select an audio channel from the following options.
Frequency characteristics Specifications HD SDI : 48 Hz to 24 MHz ±3 dB PB/PR : 48 Hz to 12 MHz ±3 dB : 50 Hz to 5.75 MHz ±3 dB PB/PR : 100 Hz to 2.75 MHz ±3 dB General Chrominance signal/luminance signal delay time error Power requirements +5 V, ±6 V (supplied from the...
Page 21
作、保守等) と異なる目的で本マニュアルを使用することを 禁止します。 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...