Related Manuals for Siemens WM12W467IL
Summary of Contents for Siemens WM12W467IL
- Page 1 Washing machine WM12W467IL siemens-home.bsh-group.com/welcome Register your product online...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Appliance settings ..40 Activating the setting mode ..40 Changing the signal volume ..40 Selecting/deselecting the appliance automatic switch-off ... . . 40 Exiting setting mode .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions The mains plug must be Warning ■ freely accessible at all times. Risk of fire/material damage/ If this is not possible, in damage to the appliance! order to comply with the The use of extension cords or relevant safety regulations, a power strips may result in fire switch (2-pole switch-off) due to overheating or short...
- Page 9 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it... - Page 12 Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
-
Page 13: Environmental Protection
Environmental protection Energy-saving mode: The display ■ Environmental panel lighting goes out after a few minutes and the Ü button flashes. protection Press any button to activate the lighting. P ackaging/used appliance Energy-saving mode is not activated E n v i r o n m e n t a l p r o t e c t i o n if a programme is running. -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 18: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement". -
Page 21: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory.To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 22: Transportation
Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■... -
Page 23: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 24: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 36 Operating/display panel Door with door handle 9S Open the door... -
Page 25: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 33 need to be pressed lightly. Temperature (Temp. °C), ■ Spin speed (Spin 0), ■... -
Page 26: Display Panel
Getting to know the appliance Display panel Further information Programme progress: Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g. to reload laundry Default programme settings: ( Temperature in °C Washing machine door: Ž... -
Page 27: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 28 – Light: Do not prewash, select the P repare the laundry speedPerfect G setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 28: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 29: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable. - Page 30 Overview of programmes Programme/type of laundry/information Settings Y Delicates / Silk Max. 2 kg For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves) $ - 800 rpm Use a detergent suitable for machine-washing delicates Note: .
- Page 31 Overview of programmes Programme/type of laundry/information Settings *** " Hygiene Max. 7 kg/5* kg Hard-wearing fabrics made of cotton or linen Ž - 60 °C Note: . Particularly suited to washing items that need to be $ - 1600** rpm hygienically clean and especially kind to sensitive skin thanks to ecoPerfect ¦, speedPerfect G, the longer wash cycle at a defined temperature, higher water...
-
Page 32: Starching
Overview of programmes Programme/type of laundry/information Settings *** ! Duvet Max. 2.5 kg Machine-washable items stuffed with synthetic fibres, such as Ž - 60 °C pillows, quilts and bedspreads; also suitable for items stuffed $ - 1200 rpm with down ecoPerfect ¦, speedPerfect G, Note: . -
Page 33: Programme Default Settings
Programme default settings Finish in 5 Programme default Before starting the programme, you settings can preselect the programme end ("Ready in" time) in hourly increments (h T he default programme settings are = hour) up to a maximum of 24 hours. P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after selecting the programme. -
Page 34: Additional Programme Settings
Additional programme settings Additional programme settings An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on the programme, can be found from ~ Page 29. -
Page 35: Operating The Appliance
Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) appliance In appliances with a drum light: The drum is lit after switching on the P reparing the washing appliance, after opening and closing the O p e r a t i n g t h e a p p l i a n c e machine door and after starting the programme. -
Page 36: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A For liquid detergent damage if they come into contact with Compartment II Detergent for the main the surfaces of the washing machine. -
Page 37: Change The Programme Default Settings
Operating the appliance Change the programme Note: Foam detection If the o symbol also lights up in the default settings display panel, the washing machine has detected too much foam during the You can use or change the default wash programme and automatically settings for this washing cycle. -
Page 38: Adding Laundry
Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Select Press the Ü button to do this. q Rinse. -
Page 39: Removing Laundry/Switching Off The Appliance
Operating the appliance Removing laundry/switching off the appliance Open the door and remove the laundry. Press the # button. The appliance is switched off. Turn off the tap. Not required for Aqua-Stop Note: models. Notes Do not leave any items of laundry in ■... -
Page 40: Appliance Settings
Appliance settings Changing the signal volume Appliance settings Use the Finish in 5 + or - button to Y ou can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and ■... -
Page 41: Sensors
Sensors Sensors A utomatic load sensing S e n s o r s Depending on the type of fabric and load, the automatic load sensing function optimally adjusts the water consumption and programme duration in each programme. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances... -
Page 42: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 43: Detergent Drawer And Housing
Cleaning and maintenance Detergent drawer and housing Open and remove the service flap. If the washing machine contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. To remove the insert: Push the insert upwards from below with your finger. -
Page 44: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Place the service flap back on, lock Filter in the water supply it into place, and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the Ü... -
Page 45: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 46: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 47: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the Ü... - Page 48 Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Î Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half of the amount of detergent recommended by the detergent manufacturer.
-
Page 49: After-Sales Service
After-sales service After-sales service I f you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. -
Page 50: Consumption Rates
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption**... -
Page 51: Technical Data
Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 850 x 600 x 590 mm In addition to warranty claims against (height x width x depth) - Page 52 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.bsh-group.com *9001288487* 9001288487 (9708)