Table of Contents
Advertisement
• US1 / US2: United States of America
• Australia
• Tasmania
• New Zealand
• Freely adjustable: customized switchover dates and times
Time interval between software start time and software end time must be greater than time
difference.
5.4.10.2
Power on/off SMS
This page allows you to set the device power on/off SMS.
1. Toggle on "Power On/Off SMS".
2. Enter the message text.
3. Select the receiver from the contact list.
4. Click "Save Changes" to save the change or click "Discard Changes" to discard the change.
5.4.10.3
Change password
This page allows you change the password for web-based configuration login.
Note
If you didn't change the password, you can log on with the default password "cim".
Siemens strongly recommend you change your default password after you first login CIM.
If you forget the password, you need to reset the CIM to factory setting (Page 18) and log on
with the default password.
To change the password, you must first enter the existing password in the Old password text
box and the new password in the two boxes for New password and then confirm with
"Change password". The password can have a maximum of 32 characters.
5.4.10.4
System reset
This page allows you restart the connected CIM or reset the connected CIM to factory setting.
Device restart
You can press the "Device Restart" button to restart the CIM.
Note
The data in UDM will be cleared after device restart.
CIM
Operating Manual, 11/2022, A5E51250518-AC
Web-based configuration
5.4 Web pages
85
Advertisement
Table of Contents
Troubleshooting
