System Security Settings Screen Details - Dell Precision Rack 7910 Owner's Manual
Hide thumbs
Also See for Precision Rack 7910:
- Owner's manual (142 pages) ,
- Quick start manual (2 pages) ,
- Setup manual (3 pages)
Table of Contents
Advertisement
System Security settings screen details
You can use the System Security screen to perform specific functions such as setting the system password, setup password,
and disabling the power button.
About this task
You can view the System Security screen by clicking System Setup Main Menu > System BIOS > System Security
Settings.
The System Security Settings screen details are explained as follows:
Menu Item
Description
Intel AES-NI
Improves the speed of applications by performing encryption and decryption using the Advanced
Encryption Standard Instruction Set and is set to Enabled by default.
System
Sets the system password. This option is set to Enabled by default and is read-only if the password
Password
jumper is not installed in the system.
Setup Password
Sets the setup password. This option is read-only if the password jumper is not installed in the system.
Password Status
Locks the system password. By default, the Password Status option is set to Unlocked.
TPM Security
Allows you to control the reporting mode of the Trusted Platform Module (TPM). By default, the TPM
Security option is set to Off. You can only modify the TPM Status, TPM Activation , and Intel TXT fields
if the TPM Status field is set to either On with Pre-boot Measurements or On without Pre-boot
Measurements.
TPM Information Changes the operational state of the TPM. By default, the TPM Activation option is set to No Change.
TPM Status
Displays the TPM status.
TPM Command
Clears all the contents of the TPM. By default, the TPM Clear option is set to No.
Intel TXT
Enables or disables the Intel Trusted Execution Technology (TXT). To enable Intel TXT, Virtualization
Technology must be enabled and TPM Security must be Enabled with Pre-boot measurements. By
default, the Intel TXT option is set to Off.
Power Button
Enables or disables the power button on the front of the system. By default, the Power Button option is
set to Enabled.
NMI Button
Enables or disables the NMI button on the front of the system. By default, the NMI Button option is set
to Disabled.
AC Power
Sets how the system reacts after AC power is restored to the system. By default, the AC Power
Recovery
Recovery option is set to Last.
AC Power
Sets how the system supports staggering of power up after AC power is restored to the system. By
Recovery Delay
default, the AC Power Recovery Delay option is set to Immediate.
User Defined
Sets the User Defined Delay when the User Defined option for AC Power Recovery Delay is
Delay (60s to
selected.
240s)
UEFI Variable
Provides varying degrees of securing UEFI variables. When set to Standard (the default) UEFI variables
Access
are accessible in the Operating System per the UEFI specification. When set to Controlled, selected
UEFI variables are protected in the environment and new UEFI boot entries are forced to be at the end of
the current boot order.
Secure Boot
Enables Secure Boot, where the BIOS authenticates each pre-boot image using the certificates in the
Secure Boot Policy. Secure Boot is disabled by default.
Secure Boot
When Secure Boot policy is Standard, the BIOS uses the system manufacturer's key and certificates to
Policy
authenticate pre-boot images. When Secure Boot policy is Custom, the BIOS uses the user-defined key
and certificates. Secure Boot policy is Standard by default.
NOTE:
The TPM menu is available only when the TPM module is installed.
CAUTION:
Clearing the TPM results in the loss of all keys in the TPM. The loss of TPM keys
may affect booting to the operating system.
System Setup
115
Advertisement
Table of Contents
Troubleshooting
