Huawei NE05E Hardware Manual page 481

Hide thumbs Also See for NE05E:

Table of Contents

HUAWEI NE05E,NE08E

Hardware Guide

Figure 4-52 Inserting the coaxial connector into the coaxial cable

Step 5 Use a welding tool to weld the internal conductor of the coaxial cable with the

internal conductor of the coaxial connector, as shown in

Figure 4-53 Welding the internal conductor

Step 6 Push the crimping sleeve toward the connector. Crimp the external conductor of

the coaxial cable tight. Use a crimping tool to tighten the crimping sleeve and the

coaxial cable connector. See

connector is assembled with the coaxial cable.

If the diameter of the cable that matches the connector plug is 2.2 mm and that of the coaxial

cable is 1.6 mm, crimp the external conductor of the coaxial cable twice by using the crimper

with a jaw of 2.5 mm. That is, crimp the external connector, rotate it by 90 degree, and then

crimp it again.

Issue 05 (2023-03-31)

4 Hardware Installation and Parts Replacement

4-54. In this way, the straight L9-M male

Table of Contents