Table of Contents
Advertisement
End time
You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the
0
button twice.
3.
Use the
or
button to set the cooking time.
@
A
4.
Press the
button.
0
5.
The
N
arrow is next to
y
ready is displayed.
Use the
@
or
A
button to set a later end time.
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The display shows the time at which the
dish will be ready and the
The
V
and
0
symbols go out. When the oven starts, the
cooking time counts down in the display and the
next to the
x
symbol. The
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
Activating the childproof lock
The function selector must be on the zero setting.
Press and hold the
h
button for approx. four seconds.
The
symbol appears in the display. The childproof lock is
@
activated.
10
. The time when the dish will be
N
arrow is next to the
y
symbol.
arrow is
N
y
symbol goes out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
button. You can set a new cooking time
0
using the
or
button. Or press the
@
A
the function selector to the off position. The oven switches off.
Changing the end time
Use the
or
button to change the end time. After a few
@
A
seconds, the change is adopted. If the timer has been set, first
press the
button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the
button to reset the end time to the current time. After
A
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
timer,
V
x
clock, press the
0
button repeatedly until the
to the relevant symbol. The display shows the value for a few
seconds.
Clock
After the appliance is connected or following a power cut,
the
symbol and three zeros are lit in the display. Set the
0
clock.
Press the
button.
0
1.
The time 12:00 is shown in the display.
Use the
@
or
A
button to set the clock.
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the
button four times.
0
1.
The time symbols light up in the display and the
next to
0
.
Use the
@
or
A
button to change the clock.
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Deactivating the childproof lock
Press and hold the
h
button for approx. four seconds.
The
symbol goes out in the display. The childproof lock is
@
deactivated.
button twice and turn
0
button twice.
0
arrow.
N
cooking time,
end time or
y
N
arrow is next
arrow is
N
0
Advertisement
Table of Contents
