Table of Contents
Advertisement
Table 5. Firmware Error Codes. (continued)
Error Code Description
2602 0011 Description: PCI probe error, bridge is not usable
2602 0012 Description: PCI device run-time error, bridge in freeze state
2680 0Axy MX-PCI bridge BIST failure
2680 0Cxx Machine check occurred
2680 0Dxx Machine check occurred; unable to
Eserver pSeries 630 Models 6C4 and 6E4 Service Guide
178
Action: If the location code identifies a slot:
1. Check the cabling to the adapter. In particular, the adapters that have serial
ports. Serial ports may require null modems or special cabling configurations
to avoid connecting driver outputs together. This may create a PCI slot power
problem and force the adapter to be deconfigured.
2. Move adapter to another slot (behind a different PCI bus).
3. Check for available firmware updates for adapter. Apply update if available.
4. Replace adapter.
5. Check for system firmware updates. Apply update if available.
6. Replace PCI riser card,
Location: U0.1-P2
Action: If the location code identifies a slot:
1. Check the cabling to the adapter. In particular, the adapters that have serial
ports. Serial ports may require null modems or special cabling configurations
to avoid connecting driver outputs together. This may create a PCI slot power
problem and force the adapter to be deconfigured.
2. Move adapter to another slot (behind a different PCI bus).
3. Check for available firmware updates for adapter. Apply update if available.
4. Replace adapter.
5. Check for system firmware updates. Apply if update available.
6. Replace PCI riser card
Location: U0.1-P2
isolate to a single device
Action/
Possible Failing FRU
Replace the PCI riser card,
Location: U0.1-P2
See "Determining Location Code" on
page 154 or location code information
related to this error.
1. Replace the part identified by the
location code associated with this
error code.
2. If the location code associated with
this error code identifies an adapter,
and replacing the adapter does not
correct the problem, replace the PCI
riser card
Location: U0.1-P2
Go to "MAP 1540: Minimum
Configuration" on page 101
Advertisement
Table of Contents
