en Avoiding material damage
The filter cover may swing out.
▶ Open the filter cover slowly.
▶ Take hold of the filter cover after opening
until it no longer swings out.
▶ Close the filter cover slowly.
The light emitted by LED lights is very
dazzling, and can damage the eyes (risk
group 1).
▶ Do not look directly into the switched-on
LED lights for longer than 100 seconds.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric
shock.
▶ Before cleaning, pull out the mains plug or
switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
2 Avoiding material damage
ATTENTION!
Condensate may cause corrosion damage.
To prevent condensation from building up, switch on
▶
the appliance during cooking.
If moisture gets into the controls, this may result in
damage.
Never clean controls with a wet cloth.
▶
Incorrect cleaning damages the surfaces.
Follow the cleaning instructions.
▶
Do not use harsh or abrasive detergents.
▶
Clean stainless steel surfaces in the direction of the
▶
finish only.
Never clean controls with stainless steel cleaners.
▶
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
▶
of them separately.
4
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic clean-
ing agents in conjunction with aluminium parts
in the interior of the appliance may cause ex-
plosions.
▶ Never use highly caustic alkaline or highly
acidic cleaning agents. In particular, do not
use commercial or industrial cleaning
agents in conjunction with aluminium parts,
e.g. grease filter on extractor hoods.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch
fire.
▶ Clean the grease filters regularly.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ If the appliance is defective, call Customer
Service.
WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric
shock.
▶ Do not use wet sponge cloths.
Condensation that flows back in may damage the ap-
pliance.
The air extraction duct must be installed with a
▶
gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they
may break off.
Do not pull design elements.
▶
Do not place objects on the design elements or
▶
hang objects from them.
There is a risk of surface damage if you do not peel off
the protective film.
Remove the protective film from all parts of the ap-
▶
pliance before using for the first time.
Painted surfaces are easily damaged.
Follow the cleaning instructions.
▶
→ "Cleaning the appliance", Page 7
Ensure that the painted surfaces are not scratched.
▶