Disc Player - Sony HT-SF2000 Operating Instructions Manual
Hide thumbs
Also See for HT-SF2000:
- Operating instructions manual (68 pages) ,
- Quick setup manual (2 pages) ,
- Speaker stand installation manual (2 pages)
Table of Contents
Advertisement
If you connect
a Blu-ray
disc
player
Be sure to change
the factory
setting of the
VIDEO
2 input button on the remote
so that
you can use the breton to control your Blu-ray
disc player.
For details, see "Changing
button
assignments"
(page 59).
Notes on HDMI connections
• Use a HDMI cable with the HDMI logo
(made by Sony).
• An audio signal input to the HDMI IN jack
is output from the SPEAKERS
jacks
and
HDMI
OUT jack. It is not output
from any
other audio jacks.
• Video signals
input to the HDMI IN j ack can
only be output
from the HDMI OUT jack.
• When you want to listen to the sound from
the TV speaker,
set "AUDIO"
to
"TV+AMP"
in the VIDEO
menu (page 41 ).
If you cannot play back multi channel
software,
set to "AMP".
However.
the sound
will not output
from the TV speaker.
• The multi/stereo
area audio
signals of a
Super Audio CD are not ompm.
• Be sure to turu on the receiver
when the
video
and audio of a playback
component
are being omput to a TV via the receiver.
If
the power
supply of the receiver
is not
tin'ned on, neither
video nor audio is
transmitted.
• Audio
signals
(sampling
frequency,
bit
length, etc.) transmitted
from a HDMI jack
may be suppressed
by the connected
component.
Cheek the setup of the
connected
component
if the image is poor or
the sound does not come om of a component
connected
via the HDMI cable.
• Sound may be interrupted
when the
sampling
frequency
or the number
of
channels
of audio output
signals
from the
playback
component
is switched.
• When the connected
component
is not
compatible
with copyright
protection
technology
(HDCP),
the image and/or the
sound from the HDMI OUT jack may be
distorted
or may not be omput.
In this case, check the specification
of the
connected
component.
• Set the resolution
of the image of the
playback
component
to 720p or 1080i when
you output 96 kHz multi channel
sound over
a HDMI
connection.
• We do not recommend
using a HDMI-DVI
conversion
cable. When you connect
a
HDMI-DVI
conversion
cable to a DVI-D
component,
the sotmd and/or the image may
not be output.
• For details
on HDMI setup of the connected
component,
refer to the operating
instructions
supplied
with the connected
component.
22cs
Advertisement
Chapters
Table of Contents
