Sony HT-SF2000 Operating Instructions Manual page 59
Hide thumbs
Also See for HT-SF2000:
- Operating instructions manual (68 pages) ,
- Quick setup manual (2 pages) ,
- Speaker stand installation manual (2 pages)
Table of Contents
Advertisement
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the VIDEO 1 jacks on the receiver,
you can set the VIDEO 1 button on this remote
to control the DVD recorder.
1
Hold down the
input
button of
which you want to change
the
assignment.
Example: Hold down VIDEO 1.
2
Referring
to the table below,
press the corresponding
button for the category
you
want.
Example: Press 4.
Now you can use the VIDEO 1 button to
control the DVD recorder.
Categories
and the
corresponding
buttons
Categories
Press
3
(command
mode DVD 1)b_
4
(command
mode DVD3)b_
5
Euro Digital
Satellite
Receiver
6
DVR (Digital
CATV terminal)
7
DSS (Digital
Satellite
Receiver)
8
BIu-ray
9
(command
mode BD 1)c)
BIu-ray
disc recorder
0/10
(command
mode BD3) c)
TV
-/--
Not assigned
ENTER/
MEMORY
a!Sonv VCRs are operated with a VTR 2 or VTR 3
C
setting which correspond to 8 mm and VHS
"_
respectively.
b_Sony DVD recorders are operated with a DVD 1 or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
3
C!For details on the BD1 or BD3 setting, refer to the
O
operating instructions supplied with the Blu-ray
_"
disc player or Blu-ray disc recorder.
To clear all remote
button
assignments
and MASTER
VOL - at
the same time.
The remote
is reset to its factory
settings.
5g_8
Advertisement
Chapters
Table of Contents
