Table of Contents
Advertisement
New and Changed Information for Firmware Release 11.0
Table 11: Cisco IP Phone 7800 User Guide revisions for Firmware Release 11.5(1).
Revision
Added the following section for Postpone a Phone
Upgrade
New and Changed Information for Firmware Release 11.0
This User Guide has been streamlined and restructured to improve the customer experience.
The following table shows the changes made for Firmware Release 11.0(1).
Table 12: Cisco IP Phone 7800 User Guide revisions for Firmware Release 11.0(1).
Revision
Added the following section for Problem Report Tool
support
Revised the following sections for cBarge and Barge
Revised the following sections for Do Not
Disturb(DND)
Feature Support
This document describes all the features that the device supports. However, not all features may be supported
with your current configuration. For information on supported features, contact your administrator.
Phone Setup
Your administrator sets up your phone and connects it to the network. If your phone is not set up and connected,
contact your administrator for instructions.
Adjust the Handset Rest
If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Cisco IP Phone 7800 Series User Guide
6
Updated Section
Phone Firmware and Upgrades, on page 20
Updated Section
Report All Phone Issues , on page 23
Shared Lines , on page 46
Turn On Do Not Disturb, on page 30
Your Phone
Advertisement
Table of Contents
