Table of Contents
Advertisement
7.9
Setting the Subsystem when using Special Mode
This operation (using the subsystem in drive blockade mode) is performed using Storage
Navigator Modular:
Note: If the special mode setting operation is performed for the array unit connected to the
NAS unit, the cluster between the NAS Units stops. When the special mode setting operation
for the array subsystem is unavoidably performed, execute it after stopping the cluster
between the NAS Units and stopping the NAS OS of both NAS Units. Start the cluster between
the NAS Units again after completing the special mode setting operation for the array
subsystem.
1. On the Tools menu, select Configuration Settings. Alternately, click Configuration
Settings on the tool bar.
2. Click the Boot Option tab.
3. For the Drive Detach Mode, select the Enable radio button:
4. Click Apply.
5. A confirmation message box displays. Click OK.
Acer | HDS WMS100™ User and Reference Guide
151
Advertisement
Table of Contents
Troubleshooting
