Cisco 8700 Series Hardware Installation Manual page 27

Table of Contents

Unpack and Install the Chassis

Note

•

Install the Bracket Mounting Adapter on 23-inch Rack Post

To install a chassis on a 23-inch 4-post or 2-post rack, you must first install the bracket mounting adapter on

the rack. Perform these steps to install the bracket mounting adapter:

Procedure

Mount the Bracket mounting adapter on the 23-inch rack post. Use three 12-24 Phillips pan-head screws with

30 in-lb (3.39 N.m) to attach each Bracket mounting adapter to the rear and front rack post on either sides.

The images in this chapter are only for representation purposes, unless specified otherwise. The chassis' actual

appearance and size may vary.

Install the Bracket Mounting Adapter on 23-inch Rack Post, on page 21

Install Bottom-Support Rails, on page 23

Rack Mount the Chassis, on page 24

Install Cable Management Brackets, on page 35

C H A P T E R

Hardware Installation Guide for Cisco 8700 Series Routers

Table of Contents

8711-32fh-m