Table of Contents
Advertisement
Ground the Chassis
b) Move the router until the slider brackets come in contact with slider rails installed in the rack. Slide the
slider brackets onto the slider rails, and then gently move the router all the way into the rack.
c) Hold the chassis level while the second person inserts two screws M5 12.45-mm Phillips dome-head
screws in each of the two rack-mount brackets (using a total of four screws) and into the cage nuts or
threaded holes in the vertical rack-mounting rails.
d) Tighten the M5 12.45-mm Phillips dome-head screw to 27.44 in-lb (3.1 N-m).
Figure 23: Slide the Cisco 8711-32FH-M Router in 19-inch 4-Post Rack
1
2
Ground the Chassis
Warning
Warning
Hardware Installation Guide for Cisco 8700 Series Routers
32
Chassis
Slider assembly
Statement 1101 Connected To Grounded Outlet
In the Scandinavian countries (Denmark, Finland, Iceland, Norway, and Sweden) the appliance must be
connected to a grounded outlet.
Statement 1024 Ground Conductor
This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable grounding is available.
3
4 x M5 12.45-mm Phillips
dome-head screws. Two screws
on each side.
Unpack and Install the Chassis
Advertisement
Table of Contents
