Table of Contents
Advertisement
Powering on the Router
Note
A dual pole breaker is needed for installation. For determining the recommended breaker size, please adhere
to local and national rules and regulations. The breaker size is based on the specifications of the product for
the current drawn and the specified voltage level.
Procedure
Step 1
Verify that the AC cable is installed in the correct AC source and outlet type.
Step 2
Attach the AC power cable to the cable connector in the AC power module.
Step 3
Place the cable through the opening in the cable tie.
Step 4
Slide the cable tie toward the plug.
Step 5
Close the cable tie on the shoulder of the power cable to secure the power cable.
Figure 27: Connecting AC Power - Cisco 8711-32FH-M
1
Connect DC Power to the Chassis
Caution
The chassis relies on the protective devices in the building installation to protect against short circuit,
overcurrent, and ground faults. Ensure that the protective devices comply with local and national electrical
codes.
AC power cable
2
Hardware Installation Guide for Cisco 8700 Series Routers
Connect DC Power to the Chassis
Cable tie
41
Advertisement
Table of Contents
