Cisco ME 3400 Software Configuration Manual page 1072
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages) ,
- Getting started manual (33 pages)
Table of Contents
Advertisement
Working with Software Images
Command
Step 3
configure terminal
Step 4
ip rcmd remote-username username
Step 5
end
Step 6
archive download-sw /overwrite /reload
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
Step 7
archive download-sw /leave-old-sw /reload
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
The download algorithm verifies that the image is appropriate for the switch model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the flash device whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
B-34
Appendix B
Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Enter global configuration mode.
This step is required only if you override the default remote
username (see Steps 4 and 5).
(Optional) Specify the remote username.
Return to privileged EXEC mode.
Download the image file from the RCP server to the switch,
and overwrite the current image.
The /overwrite option overwrites the software image in
•
flash memory with the downloaded image.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not been saved.
•
For //username, specify the username. For the RCP copy
request to execute successfully, an account must be
defined on the network server for the remote username.
For more information, see the
or Upload an Image File By Using RCP" section on
page
For @location, specify the IP address of the RCP server.
•
For /directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and
image names are case sensitive.
Download the image file from the RCP server to the switch,
and keep the current image.
•
The /leave-old-sw option keeps the old software version
after a download.
•
The /reload option reloads the system after downloading
the image unless the configuration has been changed and
not been saved.
For //username, specify the username. For the RCP copy
•
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the
an Image File By Using RCP" section on page
•
For @location, specify the IP address of the RCP server.
For /directory]/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and
image names are case sensitive.
"Preparing to Download
B-32.
"Preparing to Download or Upload
B-32.
OL-9639-07
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
