Chapter 2 Installation; Mounting The Router In A Rack - Cisco 1760 - VPN Bundle Router Hardware Installation Manual
Modular access router
Hide thumbs
Also See for 1760 - VPN Bundle Router:
- Quick start manual (40 pages) ,
- User manual (48 pages)
Table of Contents
Advertisement
Mounting the Router in a Rack
Warning
Warning
Mounting the Router in a Rack
Warning
Cisco 1760 Modular Access Router Hardware Installation Guide
2-2
This equipment needs to be grounded. Use a green and yellow 14 AWG ground
wire to connect the host to earth ground during normal use.
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
To prevent bodily injury when mounting or servicing this unit in a rack, you must
take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in
•
the rack.
When mounting this unit in a partially filled rack, load the rack from the
•
bottom to the top, with the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before
•
mounting or servicing the unit in the rack.
The rack-mounting brackets supplied with the router can be attached to a 19- or
24-inch rack. Figure 2-1 shows the bracket mounting points that attach to the rack.
Chapter 2
Installation
78-13342-03
Advertisement
Table of Contents
Troubleshooting
