Table of Contents
Advertisement
Troubleshooting Software Errors
Table 6-2
Network and System Errors and Warnings Explanation
System
Error
DHCP
IP address
refused
DHCP
IP address
cannot be
allocated
DHCP
Static IP
address
conflict with
device
<address>
DHCP
IP address
conflict with
device
<address>
DHCP
Network
interface will
be shut down
Cisco VG248 Analog Phone Gateway Software Configuration Guide
6-6
Explanation
The DHCP server
rejected the VG248's
request for an IP
address.
No DHCP server
responded to the
request.
The VG248 has a static
IP address that is
already assigned to
another device on the
network.
The DHCP server
allocated an IP address
to the VG248 that is
already in use by
another device on the
network.
A previous error caused
the network interface to
be shut down.
Chapter 6
Action
Check configuration of DHCP server. If
errors persist, assign a static IP address.
Refer to the
"Configuring Network
Settings" section on page 2-4
assigning a static IP address.
Check configuration of DHCP server. If
errors persist, assign a static IP address.
Refer to the
"Configuring Network
Settings" section on page 2-4
assigning a static IP address.
Assign a different static IP address for
either the VG248 or the conflicting device.
Refer to the
"Configuring Network
Settings" section on page 2-4
assigning a static IP address.
Check your DHCP server configuration
1.
to ensure that addresses allocated are
not reserved for static IP use.
2.
Check your network for misconfigured
devices.
Check the event log for errors.
Troubleshooting the VG248
for details on
for details on
for details on
OL-1209-02
- Quick Links:
- Accessing Configuration Options
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
