Box Contents; Tools And Equipment; Verifying Switch Operation; Powering Off The Switch - Cisco WS-C3560-48PS-S Hardware Installation Manual
Catalyst 3560 series switch
Hide thumbs
Also See for WS-C3560-48PS-S:
- Product manual (20 pages) ,
- Software configuration manual (892 pages)
Table of Contents
Advertisement
Chapter 3
Switch Installation (8- and 12-Port Switches)
Box Contents
The switch getting started guide on Cisco.com describes the box contents. If any item is missing or
damaged, contact your Cisco representative or reseller for support.
Tools and Equipment
You need to supply a number-2 Phillips screwdriver to rack-mount the switch.
Verifying Switch Operation
Before you install the switch, power it on and verify that it passes POST. See the getting started guide
for the steps required to connect a PC to the switch and to run Express Setup. To power on the switch,
connect one end of the AC power cord to the AC power connector on the switch, and connect the other
end of the power cord to an AC power outlet.
When the switch powers on, it automatically begins the POST, a series of tests that verifies that the
switch functions properly. When the switch begins POST, the system LED slowly blinks green. When
POST completes, the system LED blinks amber. If POST fails, the system LED remains amber. If POST
completes successfully, the system LED rapidly blinks green.
Call Cisco technical support representative if your switch fails POST.
Powering Off the Switch
After a successful POST, disconnect the power cord from the switch. Install the switch in a rack, on a
wall, on a table, or on a shelf as described in the
Installing the Switch
•
•
•
•
•
•
Before installing the switch, review the
OL-6337-07
Desk or Shelf Mounting, page 3-8
Wall-Mounting (with Mounting Screws), page 3-12
Magnet Mounting, page 3-15
Rack-Mounting, page 3-16
Wall-Mounting (with Rack-Mount Brackets), page 3-17
Securing the AC Power Cord, page 3-19
"Installing the Switch" section on page
"Installation Guidelines" section on page
Catalyst 3560 Switch Hardware Installation Guide
Verifying Switch Operation
3-7.
3-5.
3-7
Hide quick links:
Advertisement
Table of Contents
