Securing The Ac Power Cord - Cisco WS-C3560-48PS-S Hardware Installation Manual
Catalyst 3560 series switch
Hide thumbs
Also See for WS-C3560-48PS-S:
- Product manual (20 pages) ,
- Software configuration manual (892 pages)
Table of Contents
Advertisement
Chapter 3
Switch Installation (8- and 12-Port Switches)
Securing the AC Power Cord
The AC power-cord retainer is an optional part (PWR-CLIP-CMP).
Insert the power-cord retainer wire into the slot on the plastic holder.
Step 1
Attach the plastic holder onto the switch rear panel with the supplied screw (see
Step 2
Figure 3-11
Rotate the wire to the right side of the AC power cord connector, and insert the AC power cord (see
Step 3
Figure
Figure 3-12
Place the power cord bushing on the power cord with the opening at the top. The retainer wire only fits
Step 4
into one slot on the bushing. Move the retainer wire into the bushing slot (see
Figure 3-13
Slide the bushing so that it rests against the power-cord connector, and then rotate the bushing clockwise
Step 5
until the bushing is securely fastened and its opening is on the right side of the power cord (see
Figure
OL-6337-07
Insert the Power-Cord Retainer
3-12).
Insert the AC Power Cord
Attach the Power-Cord Bushing
3-14).
Catalyst 3560 Switch Hardware Installation Guide
Installing the Switch
Figure
3-11).
Figure
3-13).
3-19
Hide quick links:
Advertisement
Table of Contents
