Alarm Card Alarm Relay Connector Specifications; Router Performance Upgrades And Model Identification - Cisco 12406 Installation And Configuration Manual
Configuration guide
Hide thumbs
Also See for 12406:
- Replacement instructions manual (44 pages) ,
- Unpacking instructions manual (16 pages) ,
- Product overview (52 pages)
Table of Contents
Advertisement
Specifications
Alarm Card Alarm Relay Connector Specifications
Router Performance Upgrades and Model Identification
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
A-6
The alarm card alarm relay connector is a standard DB-9 connector. The relay
interface is rated at max 2A, 60V, or 50VA, whichever is greater. The connector
pins and their definitions are shown in
Table A-5
Alarm Card Alarm Relay Contact Connector Pinout
Pin
Name
1
Critical_NO
2
Critical_C
3
Major_NO
4
Minor_NO
5
Minor_C
6
Critical_NC
7
Major_NC
8
Major_C
9
Minor_NC
The compliance information label on the side of the chassis also identifies the
Cisco 12000 Series Router by its model number. The model number indicates the
router is in the Cisco 12000 Series, the maximum switching capacity the router
supports, and the number of line card and RP slots in the chassis.
For example, the Cisco 12006 Router features 30 Gbps switching capacity in a
6-slot, 2.5-Gigabit per slot chassis, whereas the Cisco 12406 Router features
120 Gbps switching capacity in a 6-slot, 10-Gigabit per slot chassis.
lists the Cisco 12006 and Cisco 12406 Routers and provides model comparison
information based on chassis slot counts, maximum switching capacity, and
switch fabric type.
Appendix A
Table
A-5.
Definition
Critical, normally open contact
Critical, common contact
Major, normally open contact
Minor, normally open contact
Minor, common contact
Critical, normally closed contact
Major, normally closed contact
Major, common contact
Minor, normally closed contact
Technical Specifications
Table A-6
OL-11497-03
Advertisement
Table of Contents
Troubleshooting
