Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1601

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)

Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:

Table of Contents

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Before you configure Interop mode 4 (or remove the configuration), you must suspend the VSAN. You

should unsuspend the VSAN only after you configure a VSAN-dependent switch WWN with the

McData OUI [08:00:88].

The following examples show how to create multiple fabrics sharing the same physical infrastructure and

how to assign ports to VSANs.

switch# config terminal

switch(config)# vsan database

switch(config-db)#

switch-config-db# vsan 2

switch(config-vsan-db)# vsan 2 name TechDoc

updated vsan 2

switch(config-vsan-db)# vsan 2 loadbalancing src-dst-id

switch(config-vsan-db)# vsan 2 loadbalancing src-dst-ox-id

switch(config-vsan-db)# vsan 2 suspend

switch(config-vsan-db)# no vsan 2 suspend

switch(config-vsan-db)# vsan 2 interface fv2/8/2

switch(config-vsan-db)# vsan 2 interface iscsi 2/1

switch(config-vsan-db)# end

The following example shows how to suspend a VSAN and enable interop mode 4.

switch# config t

switch(config)# vsan database

switch(config-vsan-db)# vsan 100 suspend

switch(config-vsan-db)# vsan 100 interop 4

switch(config-vsan-db)# exit

Related Commands

OL-18089-01, Cisco MDS NX-OS Release 4.x

Configures a WWN for a suspended VSAN that has interop mode 4 enabled.

Cisco MDS 9000 Family Command Reference

vsan database