Zone Copy - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual
Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Configuration manual (700 pages) ,
- Messages manual (518 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
zone copy
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
zone copy
To copy the active zone set to the full zone set, use the zone copy command in EXEC mode. Use the no
form of the command to negate the command or revert to the factory defaults.
Syntax Description
active-zoneset
vsan vsan-id
full-zoneset
bootflash:
ftp:
scp:
sftp:
slot0:
tftp:
volatile:
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
1.3(1)
Usage Guidelines
None.
Examples
The following example copies the active zone set to the full zone set.
switch# zone copy active-zoneset full-zoneset vsan 1
The following example copies the active zone set in VSAN 3 to a remote location using SCP.
switch# zone copy vsan 3 active-zoneset scp://guest@myserver/tmp/active_zoneset.txt
Related Commands
Cisco MDS 9000 Family Command Reference
27-6
zone copy active -zoneset full-zoneset vsan vsan-id
zone copy vsan vsan-id active-zoneset {bootflash: ftp: | full-zoneset | scp: | sftp: | tftp: |
volatile:}
Copies from the active zone set.
Configures to copy active zone set on a VSAN to full zone set.The ID of the
VSAN is from 1 to 4093.
Copies the active-zone set to the full-zone set.
Copies the active-zone set to a location in the bootflash: directory.
Copies the active-zone set to a remote location using the FTP protocol.
Copies the active-zone set to a remote location using the SCP protocol.
Copies the active-zone set to a remote location using the SFTP protocol.
Copies the active-zone set to a location in the slot0: directory.
Copies the active-zone set to a remote location using the TFTP protocol.
Copies the active-zone set to a location in the volatile: directory.
Modification
This command was modified.
Chapter 27
Z Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x
Advertisement
Table of Contents
