Table of Contents
Advertisement
Chapter 3
Installing and Configuring Route Switch Processors and Supervisor Engines
•
•
Periodically check the resistance value of the antistatic strap. The measurement should be within the
Caution
range of 1 and 10 megohms (Mohms).
Tools Required for Module Installation
These tools are required to install modules in the Cisco 7600 series router:
•
•
•
Determining Module Location
Determine which chassis slot to install the module in.
install a supervisor engine or route switch processor.
OL-10100-11
Avoid contact between the printed circuit boards and clothing. The wrist strap only protects
components from ESD voltages on the body; ESD voltages on clothing can still cause damage.
Never attempt to remove the printed circuit board from the metal carrier.
Flat-blade screwdriver
Antistatic wrist strap or other grounding device
Antistatic mat or antistatic foam
Table 3-1
Module
Route Switch Processor 720
(RSP720-10GE)
Route Switch Processor 720
(RSP720)
Supervisor Engine 720
(Sup720)
Supervisor Engine 2T
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
Table 3-1
lists the chassis slots in which you can
Supervisor Engine and Route Switch Processor Slot
Assignments
Slot Assignments
Slots 1 and 2 (3-slot enhanced [-S] chassis
•
and 4-slot chassis)
Slots 5 and 6 (6-slot and 9-slot enhanced [-S]
•
chassis and 9-slot chassis)
Not supported in the 3-slot, 6-slot, or 13-slot
•
chassis
Slots 1 and 2 (4-slot chassis)
•
Slots 5 and 6 (6-slot and 9-slot chassis,
•
including enhanced [-S] chassis)
Slots 7 and 8 (13-slot chassis)
•
Not supported in the 3-slot chassis
•
•
Slots 1 and 2 (3-slot and 4-slot chassis)
•
Slots 5 and 6 (6-slot and 9-slot chassis)
•
Slots 7 and 8 (13-slot chassis)
Slots 5 and 6 (9 slot 7609-S chassis).
•
Determining Module Location
3-3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
