Chapter 3
Installing and Configuring Route Switch Processors and Supervisor Engines
router#show module 1
Mod Ports Card Type
Serial No.
--- ----- ----------------------------------------------------
------------------------------ ------------------------
1
Mod MAC addresses
Status
--- ------------------------------------------------ ------- --------------
-------------------------- -------
1
c89c.1dfa.fb34 to c89c.1dfa.fb37
Mod Sub-Module
Hw
---- -------------------------------------------- -------------------------
----------------------- ------- -------
1
Policy Feature Card 3
1
C7600 MSFC4 Daughterboard 7600-MSFC4
Mod
---- -------------------
1
Pass
Order MINI- DIMM if your MEM PIDs are:
•
MEM-RSP720-2G
MEM-RSP720-4G
•
MEM-RSP720-SP2G
•
Order SO-DIMM if your MEM PIDs are:
MEM-A-RSP720-2G
•
MEM-A-RSP720-4G
•
MEM-A-RSP720-SP2G
•
7600 chassis supports RSP720-GE and RSP720-10GE.
DIMMs are located on the CPU daughter card and you can see it on top of the
DIMM slot and RP processor has two DIMM slots. Slot 1 and 2 are for the RP processor. Slot 3 is for
the SP processor.
OL-10100-11
2
Route Switch Processor 720 (Active)
Status
Online Diag Status
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
RSP720-3CXL-GE
Hw
Fw
5.12
12.2(33r)SRE 12.2(33)SRD5 Ok
Model
7600-PFC3CXL
SAL150673QR
SAL1542T06C
4.0
Figure 3-6
shows the location of the DIMMs.
Upgrading DIMMs on RSP720
Model
SAL15077HPS
Sw
Serial
1.1
Ok
Ok
? ? ? <- <-
Figure
3-6. SP has one
3-15