Remove Shipping Screws; Finalize The Installation; Reinstall The Drawer - GE SBSD137 Installation Instructions Manual

Washer/dryer pedestal with drawer divider for washer models: gbvh5140; gbvh6260; gcvh6260; gcvh6600; ghdvh626; ghdvh670; wbvh5100; wbvh6240; wcvh6260; wcvh6600; whdvh626; whdvh660 for dryer models: dbvh510; dbvh512; dcvh515; dcvh660; dhdvh52; dhdvh66; pbv

Hide thumbs Also See for SBSD137:

Installation instructions manual (36 pages)

Installation instructions manual (12 pages)

Table of Contents

Available languages

LEVEL THE WASHER OR DRYER

Locate the 4 legs from the parts package

and install.

Stand the washer or dryer upright. Move

it close to its final location.

Make sure that the washer or dryer

is level by placing a spirit level on top.

Check side to side and front to back.

Use an open

ended wrench

to adjust the

legs in and

out. Tighten

the lock nut

against the

bottom of

the pedestal.

NOTE: To minimize vibration, the locking

nuts must be tight.

REINSTALL THE DRAWER

Check to

be sure the

slides are

closed.

Slide the

drawer

Drawer

into the

divider

opening.

Align the

drawer

supports to

the slides on

each side.

Reinstall the original screws into each

drawer slide. Tighten both screws.

Open the drawer fully. Slide drawer

divider into slots in the center of the

drawer. The drawer should slide

smoothly when you push it closed.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Installation Instructions