Page 1
» D00445400A IF-DA8 D/A Converter OWNER’S MANUAL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT Ü REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ÿ The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
When replacing the fuse only a correctly rated approved type Funkstörungen versursachen ; in diesem Fall kann vom should be used and be sure to re-fit the fuse cover. Betrieber verlang werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen. DOUBT — CONSULT COMPETENT ELECTRICIAN. –– TASCAM IF-DA8...
(including amplifiers) supporting structure, grounding of the lead-in wire to an antenna discharge that produce heat. unit, size of grounding conductors, location of antenna-discharge unit, con- nection to grounding electrodes, and requirements for the grounding elec- trode. TASCAM IF-DA8 ––...
The digital audio levels can be referenced to one of The word clock for the IF-DA8 can be taken from the three different analog levels, depending on the source TDIF-1 connector or from an external word project setup.
These standard levels are as follows, together with TDIF-1 source whose digital audio will be converted the settings of this switch which will match the refer- to analog by the IF-DA8 (for example, a digital mix- ence level in use in your installation.: ing console).
The eight sub-groups of the console are used for the surround channels and also for the DTRS D/A resolution 24-bit recorder. The IF-DA8 provides high-quality D/A Clock source D I/O2, external word conversion to drive the surround monitor amplifiers,...