Transport Udp Load-Share (Netflow-Lite Exporter Submode) - Cisco Catalyst 4500 Series Command Reference Manual
Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
transport udp load-share (netflow-lite exporter submode)
transport udp load-share (netflow-lite exporter submode)
NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
Note
To specify the number of destination ports to load balance on for a NetFlow-lite collector, use the
transport udp load-share command. To delete a transport UDP, use the no form of this command.
Syntax Description
destination-port
Defaults
1
Command Modes
netflow-lite exporter submode
Command History
Release
15.0(2)SG
Usage Guidelines
The CLI for UDP destination port load sharing allows you leverage multiple receive packet queues in
current server NICs, where the collector is running. This is an optional parameter. When number >= 2
is configured, a switch exports datagrams with a UDP destination port number that "round robins"
between a set of consecutive destination UDP port numbers starting with the base udp port number and
ending with base udp port number + num ports-1. Typically, netflow templates are sent on the base UDP
port number and the packet sample netflow records are sent on the remaining UDP ports. So, the
collector provides optimized processing for templates or metadata and packet sample records on a
socket.
Examples
This example shows how to specify a UDP transport destination port for a NetFlow-lite collector:
Switch# config terminal
Switch(config)# netflow-lite exporter exporter1
Switch(config-netflow-lite-exporter)# destination 5.5.5.6
Switch(config-netflow-lite-exporter)# source 5.5.5.5
Switch(config-netflow-lite-exporter)# transport udp 8188
Switch(config-netflow-lite-exporter)# transport udp load-share
Switch(config-netflow-lite-exporter)# ttl 128
Switch(config-netflow-lite-exporter)# cos 7
Switch(config-netflow-lite-exporter)# dscp 32
Switch(config-netflow-lite-exporter)# template data timeout 1
Switch(config-netflow-lite-exporter)# options sampler-table timeout 1
Switch(config-netflow-lite-exporter)# options interface-table timeout 1
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-1090
transport udp load-share destination-port
no transport udp load-share destination-port
Specifies number of destination ports to load balance on.
Modification
Support for this command was introduced on the Catalyst 4948E and
Catalyst 4948E-F Ethernet switches.
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01
- Quick Links:
- Show Commands
Hide quick links:
Advertisement
Table of Contents
