Cisco Catalyst 4500 Series Command Reference Manual page 752
Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
show etherchannel
Ports in the Port-channel:
Index
-------------------
Switch#
This example shows how to display load-balancing information:
Switch# show etherchannel load-balance
Source XOR Destination mac address
Switch#
This example shows how to display a summary of information for a specific group:
Switch# show etherchannel 1 brief
Group state = L3
Ports: 2
port-channels: 1 Max port-channels = 1
Switch#
This example shows how to display detailed information for a specific group:
Switch# show etherchannel 1 detail
Group state = L3
Ports: 2
Port-channels: 1 Max Port-channels = 1
Port: Fa5/4
------------
Port state
Channel group = 1
Port-channel
Port indx
Flags:
Timers: H - Hello timer is running.
Local information:
Port
Fa5/4
Age of the port in the current state: 02h:33m:14s
Port: Fa5/5
------------
Port state
Channel group = 1
Port-channel
Port indx
Flags:
Timers: H - Hello timer is running.
Local information:
Port
Fa5/5
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-694
Load
Port
Maxports = 8
Maxports = 8
Ports in the group:
-------------------
= EC-Enbld Down Not-in-Bndl Usr-Config
Mode = Desirable
= null
GC
= 0
Load = 0x00
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Flags State
Timers
d
U1/S1
= EC-Enbld Down Not-in-Bndl Usr-Config
Mode = Desirable
= null
GC
= 0
Load = 0x00
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Flags State
Timers
d
U1/S1
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Gcchange = 0
= 0x00000000
Psudo-agport = Po1
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
Hello
Partner
PAgP
Interval Count
Priority
1s
0
128
Gcchange = 0
= 0x00000000
Psudo-agport = Po1
C - Device is in Consistent state.
P - Device learns on physical port.
Q - Quit timer is running.
I - Interface timer is running.
Hello
Partner
PAgP
Interval Count
Priority
1s
0
128
Learning
Group
Method
Ifindex
Any
0
Learning
Group
Method
Ifindex
Any
0
OL-27596 -01
- Quick Links:
- Show Commands
Hide quick links:
Advertisement
Table of Contents
