Vlan Internal Allocation Policy - Cisco Catalyst 4500 Series Command Reference Manual
Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
vlan internal allocation policy
vlan internal allocation policy
To configure the internal VLAN allocation scheme, use the vlan internal allocation policy command.
To return to the default setting, use the no form of this command.
Syntax Description
ascending
descending
Defaults
The default is the ascending allocation scheme.
Command Modes
Global configuration mode
Command History
Release
12.1(19)EW
Usage Guidelines
You can configure internal VLAN allocation to be from 1006 and up or from 4094 and down.
The internal VLANs and user-configured VLANs share the 1006 to 4094 VLAN spaces. A "first come,
first served" policy is used in allocating these spaces.
The vlan internal allocation policy command allows you to configure the allocation direction of the
internal VLAN.
During system bootup, the internal VLANs that are required for features in the startup-config file are
allocated first. The user-configured VLANs in the startup-config file are configured next. If you
configure a VLAN that conflicts with an existing internal VLAN, the VLAN that you configured is put
into a nonoperational status until the internal VLAN is freed and becomes available.
After you enter the write mem command and the system reloads, the reconfigured allocation scheme is
used by the port manager.
Examples
This example shows how to configure the VLANs in a descending order as the internal VLAN allocation
policy:
Switch(config)# vlan internal allocation policy descending
Switch(config)#
Related Commands
Command
show vlan internal usage
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-1122
vlan internal allocation policy {ascending | descending}
no vlan internal allocation policy
Specifies to allocate internal VLANs from 1006 to 4094.
Specifies to allocate internal VLANs from 4094 to 1006.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays information about the internal VLAN allocation.
OL-27596 -01
- Quick Links:
- Show Commands
Hide quick links:
Advertisement
Table of Contents
