Troubleshooting the OC-12 Dynamic Packet Transport Spatial Reuse Protocol WAN Card
Troubleshooting the OC-12 Dynamic Packet Transport Spatial
Reuse Protocol WAN Card
Figure 4-3
Packet Transport (DPT) Spatial Reuse Protocol (SRP) WAN card.
Figure 4-3
Table 4-6
LED
POWER
STATUS - bi-color
MAINTENANCE
RX CARRIER–B
ACTIVE
RX PKTS (Packets)
RX CARRIER–A
ACTIVE
Cisco uBR10012 Universal Broadband Router Troubleshooting Guide
4-14
shows and
Table 4-6
describes the LEDs on the Cisco BR10-SRP-OC12SML Dynamic
OC12 SRP/DPT WAN Line Card LEDs
Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs
Status
Green
Off
Yellow
Green
Off
Yellow
Green
Off
Green
Off
Blinking
Green
Off
Green
Off
Green
Off
Description
Indicates that power is being supplied to the
Cisco uBR10-SRP- OC12SML DPT WAN line card.
Power off.
Indicates that the CPU is in the bootup process, self test, or
downloading code.
Indicates that the CPU has successfully completed the boot,
self test, and code download process, and that the
Cisco uBR10-SRP- OC12SML DPT WAN line card is the
active card.
Normally off. Indicates that no maintenance action is required.
Indicates a required maintenance operation and that the
Cisco uBR10-SRP- OC12SML DPT WAN line card can be
hot-swapped.
Indicates that the DPT port WAN has detected valid SONET or
SDH framing on the received carrier.
No valid SONET or SDH framing.
Indicates that side B of the DPT port line is functioning.
Not active.
Indicates that the DPT port line has received a packet. This
LED flickers in normal operation, indicating traffic.
No traffic.
Indicates that the DPT port line has detected valid SONET or
SDH framing on the received carrier.
No valid SONET or SDH framing.
Indicates that side A of the DPT port line is functioning.
Not Active
Chapter 4
Troubleshooting Line Cards
OL-1237-01