Unsupported Mpls Vpn Commands; Unsupported Ppp Commands; Spectrum Management Commands; Unsupported Telco-Return Commands - Cisco uBR10012 Troubleshooting Manual
Universal broadband router
Hide thumbs
Also See for uBR10012:
- Hardware installation manual (280 pages) ,
- Software configuration manual (240 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Appendix A
Unsupported Commands
Unsupported MPLS VPN Commands
The following commands are not supported in any Cisco IOS software release.
•
•
•
•
•
•
•
Unsupported PPP Commands
The following commands are not supported in any Cisco IOS software release.
•
•
•
•
•
•
Spectrum Management Commands
The following commands are supported in Cisco IOS Release 12.2(8)BC2 and later 12.2 BC releases.
These commands are not supported in previous releases.
•
•
•
•
Unsupported Telco-Return Commands
The following commands are not supported in any Cisco IOS software release.
•
•
•
•
•
OL-1237-01
ip vrf
ip vrf forwarding
mpls ip
mpls label-protocol ldp
show ip protocols vrf
show ip vrf
show ip route vrf
compress [predictor | stac | mppc [ignore-pfc]]
debug ppp cbcp
ppp bridge appletalk
ppp bridge ip
ppp bridge ipx [novell-ether | arpa | sap | snap]
ppp reliable-link
cable upstream hop-priority
cable upstream threshold
show cable modem [ip-address | interface | mac-address] snr
show controllers cable upstream spectrum
cable telco-return enable
cable telco-return interval
cable telco-return spd dhcp-authenticate
cable telco-return spd dhcp-server
cable telco-return spd dial-timer
Cisco uBR10012 Universal Broadband Router Troubleshooting Guide
Unsupported MPLS VPN Commands
A-3
Advertisement
Table of Contents
Troubleshooting
