Table of Contents
Advertisement
Lubricating the guide rollers
•
Connect the grease gun to the grease nipples.
•
Pump in grease until clean grease emerges from the
overflow hole.
Adjusting the drive belt
The drive belt is fully enclosed and well-protected from dust,
dirt and mechanical damage when cutting.
•
Dismantle the cover and loosen the belt tensioning screw.
•
Press on the belt tensioner with your thumb to tension the
belt. Now tighten the screw holding the belt tensioner.
18 –
English
MAINTENANCE
Belt tensioning/replacing the drive
belt
•
Dismantle the cover and loosen the belt tensioning screw.
Push back the belt tensioning roller and install a new drive
belt.
CAUTION! Make sure that both belt pulleys are clean and
undamaged before a new drive belt is fitted.
•
Press on the belt tensioner with your thumb to tension the
belt. Now tighten the screw holding the belt tensioner.
•
Fit the belt cover.
!
Belt pulley and clutch
Never start the engine when the belt pulley and clutch are
removed for maintenance.
Carburettor
Your Husqvarna product has been designed and
manufactured to specifications that reduce harmful
emissions.
The carburettor is equipped with fixed needles to ensure the
machine always receives the correct mixture of fuel and air.
When the engine lacks power or accelerates poorly, do the
following:
•
Check the air filter and replace if necessary.
•
When this does not help, contact an authorised service
workshop.
WARNING! Never use the power cutter
without a blade guard over the cutting blade.
Advertisement
Table of Contents
