Show Archive Status - Cisco Catalyst 3030 Command Reference Manual
Blade switch
Hide thumbs
Also See for Catalyst 3030:
- Getting started manual (34 pages) ,
- Getting started (122 pages)
Table of Contents
Advertisement
Chapter 2 Cisco Catalyst Blade Switch 3030 Cisco IOS Commands
show archive status
Use the show archive status privileged EXEC command to display the status of a new image being
downloaded to a switch with the HTTP or the TFTP protocol.
Syntax Description
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEE
Usage Guidelines
If you use the archive download-sw privileged EXEC command to download an image to a TFTP server,
the output of the archive download-sw command shows the status of the download.
If you do not have a TFTP server, you can use the embedded device manager to download the image by
using HTTP. The show archive status command shows the progress of the download.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
These are examples of output from the show archive status command:
Switch# show archive status
IDLE: No upgrade in progress
Switch# show archive status
LOADING: Upgrade in progress
Switch# show archive status
EXTRACT: Extracting the image
Switch# show archive status
VERIFY: Verifying software
Switch# show archive status
RELOAD: Upgrade completed. Reload pending
78-17262-01
show archive status [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco Catalyst Blade Switch 3030 Command Reference
show archive status
2-267
Advertisement
Table of Contents
